HANSUN 
Overview:
HS1202 10M/100M/1000M dual fiber media converter can extend the transmission distance of a network from 10/100/1000Base_Tx &10/100/1000Base_Fx over copper wires to 120KM through 2 core fiber .
Fiber-Optic Media Converter series is a kind of 10/100/1000MMbps intelligent adaptive fast Ethernet media converter .It can implement date transmission between twisted pair electrical signals and optical signals which are the two type of network connection media .This type of media converter can extend the transmission distance of a network from 10/100/1000M over copper wires to 120KM in which there is no help of any other converter. It should be installed in 16 rack media converter when chassis used.
Features:
Ø Supporting : Full duplex and half –duplex transmission and capable of automatic adaption. efficient builtin switching core ,to implement flow control and reduce broadcast packets.
Ø Supporting : The transmission of extra-long packes over VLAN
Ø Surporting : The selection of mutiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single –mode and single –fiber single –mode, to satisfy the extended requirements of users.
Technical index:
| Parameter | Specifications |
| Access mode | 10/100/1000Mbps |
| Standard | IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree |
| Wavelength | 850nm/1310nm/1550nm |
| Transmission distance | Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km; single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pair: 100m |
| Port | TWO RJ45 connector, connected to STP/UTP category-5 twisted pair One fiber port: Multi-mode – SC or ST (fiber size: 50,62.5/125µm) Single mode – SC/FC fiber port (fiber size: 9/125µm) Single-fiber single-mode – SC/FC fiber port (fiber size: 9/125µm) |
| Conversion mode | Medium conversion, storing and forwarding |
| MAC address table | I K |
| Buffer space | 1Mbit |
| Flow control | Full duplex state: flow control; half duplex state: back pressure mode |
| Delay | 9.6us |
| Bit error rate | <1/1000000000 |
| MTBF | 100,000 hours |
| LED | Power TX link ( fiber link action ), TP LINK1000, TP LINK100, TP ACT ) FDX (FX full duplex mode), FX100 (Fiber, with a transmission rate of 100M) TP1/2/3/4 LINK/ACT (1/2/3/4-port twisted pairs connection action) TP1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100M) |
| Power | AC220 0.5A/PC-48(builtin) |
| Power consumption | 5W |
| Operating temperature | -10℃~55ºC |
| Operating humidity | 5%~90% |
| Storage temperature | -40℃~70ºC |
| Storage humidity | 5%~90% (non-condensing) |
| Dimensions | 140mm * 111 * 30mm(in) 95 × 70 × 26mm(out) |
Ordering information:
| Model | Working wavelength | Fiber | Electrical port | Fiber model | Tx power(dBm) | Rx power(dBm) | Transmissiondistance |
| HS130-SSC-2 | 1310nm | SC | RJ-45 | Multi-mode | -22 to -12 | = -30 | 2km |
| HS130-SSC-25S | 1310nm FP | SC/FC/ST | RJ-45 | Single mode | -15 to -8 | = -37 | 25km |
| HS130-SSC-40S | 1310nm FP | SC/FC/ST | RJ-45 | Single mode | -8 to -3 | = -37 | 40km |
| HS130-SSC-60S | 1310nm FP | SC/FC/ST | RJ-45 | Single mode | -3 to 0 | = -37 | 60km |
| HS130-SSC-80S | 1550nm DFB | SC/FC/ST | RJ-45 | Single mode | -8 to -3 | = -40 | 80km |
| HS130-SSC-100S | 1550nm DFB | SC/FC/ST | RJ-45 | Single mode | -3 to 0 | = -40 | 100km |
| HS130-SSC-120S | 1550nm DFB | SC/FC/ST | RJ-45 | Single mode | 0 to 3 | = -40 | 120km |
