Data Rate:	10Gb/s	Distance:	30m
Connector:	RJ45	DDM:	Support
Power Supply:	3.3V	Working Temperature:	0~70℃
Warranty:	3 Years	Compatibility:	Cisco, HP, Huawei, Finisar…
Manufacturer:	Yes
High Light:	3.3V SFP-10G-T,	SFP+ Module, SFP-10G-T	10G Copper

Product Description

10Gb/s SFP-10G-T 10G Copper Ethernet SFP+ Transceiver 30 meters Compatible Cisco

Description

SFP+-10GBASE-T Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T standards as specified in IEEE Std 802.3. SFP+-10GBASE-T uses the SFP’s RX_LOS pin for link indication. If pull up SFP’s TX_DISABLE pin, PHY IC be reset.

Features

Support 10Gbase-T / 5Gbase-T / 2.5Gbase-T / 1000base-T
Hot-pluggable SFP footprint
Compact RJ-45 connector assembly
RoHS compliant and lead-free
Single +3.3V power supply
10 Gigabit Ethernet over Cat 6a cable
Ambient Operating temperature: 0°C to +65°C

Cable Length

Standard	Cable	Reach	Host Port
10Gbase-T	CAT6A	30m	XFI
5Gbase-T/2.5Gbase-t	CAT5E	50m	5GBase-R/2.5GBase-X
1000base-T	CAT5E	100m	1000base-FX

Optical Parameters

Parameter	Symbol	Min.	Typical	Max.	Units	Notes/Conditions
Supply Current	Is		320	375	mA	1.2W max power over full range of voltage and temperature. See caution note below
Input Voltage	Vcc	3.13	3.3	3.47	V	Referenced to GND
Surge Current	Isurge		30		mA	Hot plug above steady state current. See caution note

Low-Speed Signals

Low-Speed Signals, Electronic Characteristics
Parameter	Symbol	Min	Max	unit	Notes/Conditions
SFP Output LOW	VOL	0	0.5	V	4.7k to 10k pull-up to host_Vcc,measured at host side of connector
SFP Output HIGH	VOH	host_Vcc -0.5	host_Vcc + 0.3	V	4.7k to 10k pull-up to host_Vcc,measured at host side of connector
SFP Input LOW	VIL	0	0.8	V	4.7k to 10k pull-up to Vcc,measured at SFP side of connector
SFP Input HIGH	VIH	2	Vcc + 0.3	V	4.7k to 10k pull-up to Vcc,measured at SFP side of connector

High-Speed Electrical Interface

High-Speed Electrical Interface Transmission Line-SFP
Parameter	Symbol	Min	Typ	Max	unit	Notes/Conditions
Line Frequency	fL		125		MHz	5-level encoding, perIEEE 802.3
Tx Output Impedance	Zout,TX		100		Ohm	Differential, for allfrequencies between1MHz and 125MHz
Rx Input Impedance	Zin,RX		100		Ohm	Differential, for allfrequencies between1MHz and 125MHz

High-Speed Electrical Interface, Host-SFP
Parameter	Symbol	Min	Typ	Max	unit	Notes/Conditions
Single ended data inputswing	Vinsing	250		1200	mV	Single ended
Single ended data outputswing	Voutsing	350		800	mV	Single ended
Rise/Fall Time	Tr,Tf		175		psec	20%-80%
Tx Input Impedance	Zin		50		Ohm	Single ended
Rx Output Impedance	Zout		50		Ohm	Single ended

10GBASE-T SFP Copper RJ-45 30/80m Transceiver Module - SFP Transceiver - 1

10GBASE-T SFP Copper RJ-45 30/80m Transceiver Module - SFP Transceiver - 3

Ordering information

Dual Fiber SFP Transceiver
Part Number	Product Description
155Mbp/s SFP Transceiver
SFP-FE-M850	155Mbps, 850nm MM 2km Dual LC, DDM 0°C~+70°C
SFP-FE-M1310	155Mbps, 1310nm MM 2km Dual LC, DDM 0°C~+70°C
SFP-FE-S1310-20	155Mbps, 1310nm SM 20km Dual LC, DDM 0°C~+70°C
SFP-FE-S1310-40	155Mbps, 1310nm SM 40km Dual LC, DDM 0°C~+70°C
SFP-FE-S1310-80	155Mbps, 1550nm SM 80km Dual LC, DDM 0°C~+70°C
SFP-FE-S1310-120	155Mbps, 1550nm SM 120km Dual LC, DDM 0°C~+70°C
1.25Gbps SFP Transceiver
SFP-GE-M850	1.25Gbps, 850nm MM 500m Dual LC, DDM 0°C~+70°C
SFP-GE-M1310	1.25gbps, 1310nm MM 2km Dual LC, DDM 0°C~+70°C
SFP-GE-S1310-20	1.25Gbps, 1310nm SM 20km Dual LC, DDM 0°C~+70°C
SFP-GE-S1310-40	1.25Gbps, 1310nm SM 40km Dual LC, DDM 0°C~+70°C
SFP-GE-S1550-60	1.25Gbps, 1550nm SM 60km Dual LC, DDM 0°C~+70°C
SFP-GE-S1550-80	1.25Gbps, 1550nm SM 80km Dual LC, DDM 0°C~+70°C
SFP-GE-S1550-120	1.25Gbps, 1550nm SM 120km Dual LC, DDM 0°C~+70°C
10Gbps SFP Transceiver
SFP+-10G-M850-300	10G SFP+ SR Multi mode dual fiber LC 850nm 300M
SFP+-10G-M1310-220	10G SFP+ LRM Multi mode dual fiber LC 1310nm 220M
SFP+-10G-S1310-20	10G SFP+ LR Single mode dual fiber LC 1310nm 20km
SFP+-10G-S1310-40	10G SFP+ER Single mode dual fiber LC 1310nm 40km
SFP+-10G-S1550-40	10G SFP+ER Single mode dual fiber LC 1550nm 40km
SFP+-10G-S1550-80	10G SFP+ZR Single mode dual fiber LC 1550nm 80km
XFP Transceiver
XFP-10G-M850-300	10G XFP SR Multi mode dual fiber LC 850nm 300M
XFP-10G-S1310-10	10G XFP LRM Single mode dual fiber LC 1310nm 10kM
XFP-10G-S1310-20	10G XFP LR Single mode dual fiber LC 1310nm 20km
XFP-10G-S1550-40	10G XFP ER Single mode dual fiber LC 1550nm 40km
XFP-10G-S1550-40	10G XFP ZR Single mode dual fiber LC 1550nm 80km

1.Are you factory or trading company?

We have 2 big factories, one is for fiber optic cable, the other one is for communication equipments,so we can offer you high quality ,factory price and fast delivery. Welcome to visit our factory, we can pick you up from airport.

2. Can I buy samples before placing orders?

Yes.We are happy to send you sample to test quality.

3.What is your lead time?

-For usual products, we have stock, we can ship out within 3 days. If we don’t have stock,It depends on the quantity , normally 7 days to 15 days.

4.What is your payment term?

30% as deposit, balance before delivery. Or balance againest copy of BL.

5.What is the shipping method?

-By sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect).

6.Can you offer ODM&OEM?

-Yes, we accept ODM&OEM.We have our own R&D team with 18 years experience.

The bulk cargo of optical fiber equipment can be transported by air or by sea; the whole container can be transported by sea. The shipping time for conventional goods is 3-5 days, and OEM goods are generally shipped within 7-10 days. All packaging is in accordance with customer requirements.