4 Ports 10/100/1000Mbps PoE Switch with 1 Gigabit RJ45 and 1 SFP Uplink HX304GP-1G1SFP
4 Ports 10/100/1000Mbps PoE Switch with 1 Gigabit RJ45 and 1 SFP Uplink HX304GP-1G1SFP
--- Fully IEEE802.3af/at standard compliant. --- Support PoE power up to 15.4/25.5W for each PoE ports. --- Support 250m PoE distance transmission --- Plug & Play. No configuration required. --- Reliable and great value. --- 6KV Surge protection
Overview: This 6 Ports PoE switch provides power and data from a single point, using Power over Ethernet(PoE) over a single Cat5 cable. HX304GP series features 5ch 10/100/1000M PoE ports with 1 more Gigabit RJ45 and 1 SFP Uplink and supply industry-standard IEEE 802.3af/at power. It also offers a simple, cost-effective and non-blocking wire-speed performance. It comes compact metal housing, suitable for desktop deployment in Network Security application.
PoE AI Watchdog
Detect PoE Camera when it is frozen, and reboot it automatically by the new AI PoE swtich. Smart PoE Power Supply
Featuring multiple 10/100/1000Mbps PoE ports which support IEEE 802.3af/at protocol and 2 uplink ports, the PoE Switch Series provides maximum power budget of 65W for all PoE ports and 30W for every single PoE port respectively, allowing users to have several different camera variations configured. Flexible Extend Mode
With the two model(Default.cctv) optional modes available. the PoE Switch Series is able to offer more flexible choices for long range transmission, extending the distance up to 250m, which is greatly helpful to bring better user experience. Surge Protection
This PoE switch is based on the IEC61643-21:2000 standard,Reaching 6KV surge protection, the PoE ports owns the capacity to keep the PoE Switch from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.
Plug and Power Network Deployment
All of the RJ45 copper interfaces in this PoE switch support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6, 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
Model
HX304GP-1G1SFP
Hardware Specifications
Connector
4 10/100BASE-T RJ45 auto MDI/MDIX ports1 10/100/1000BASE-T RJ45 auto MDI/MDIX ports
1 1000 Base-X SFP Slots
PoE Port
4 10/100Mbps POE PSE port
SFP
Singe fiber/Dual fiber supported. Distance vary the module
Thermal Fan
Fanless Design
LED indicators
Power Indicator: PWR(green).Network Indicator: Link(yellow)
PoE Working Indicator: PoE(green)
Switch Architecture
Store and Forward
Transmission model
IEEE802.3X full-duplex and Backpressure half-duplex
4 Ports 10/100Mbps PoE switch with 1 Gigabit Uplink and 1 SFP,6KV surge protection,IEEE802.3af/at
Perfectly Integrated Solution for PoE IP Security solution Benchu Group 6 ports gigabit PoE swtich provides four 802.3at/af PoE ports for catering to small-scale home and SOHO IP surveillance networks at a lower total cost. The HX304GP comes with a high-performance switch architecture and 65-watt PoE power budget. The recorded video files from the 4 PoE IP cameras can be powered by the HX304GP and saved in the 4-channel NVR system or using surveillance software to perform comprehensive security monitoring. Besides it also offer 2 more Ethernet Uplink to server like NVR system or Public server Group.
IP Office Department/Workgroup PoE Switch solution To further expand the office premises, the additional IP telephones required could be installed at less cost via the PoE IP phone system, better than the traditional circuit wiring telephony system. The Benchu Group HX304GP series PoE Switch helps enterprises to create an integrated data, voice, and powered network. The IEEE 802.3af/at compliant IP phones can be installed without the need of an additional power cable because the power can be provided via the standard Ethernet cable from the connected PoE switch, in this case,VoIp Phone deployment.
1.Are you factory or trading company?
We have 2 big factories, one is for fiber optic cable, the other one is for communication equipments,so we can offer you high quality ,factory price and fast delivery. Welcome to visit our factory, we can pick you up from airport.
2. Can I buy samples before placing orders?
Yes.We are happy to send you sample to test quality.
3.What is your lead time?
-For usual products, we have stock, we can ship out within 3 days. If we don’t have stock,It depends on the quantity , normally 7 days to 15 days.
4.What is your payment term?
30% as deposit, balance before delivery. Or balance againest copy of BL.
5.What is the shipping method?
-By sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect).
6.Can you offer ODM&OEM?
-Yes, we accept ODM&OEM.We have our own R&D team with 18 years experience.
The bulk cargo of optical fiber equipment can be transported by air or by sea; the whole container can be transported by sea. The shipping time for conventional goods is 3-5 days, and OEM goods are generally shipped within 7-10 days. All packaging is in accordance with customer requirements.
HANSUN 
